Home / Blog
Buyer's guide

One Software for Screen Printing, Embroidery and DTF: What to Demand

By the Print-Shop Manager team · 6 min read · Updated October 19, 2026

Most shops start with one decoration method and add another when a customer asks. Then the software that was fine for screen printing starts to creak: embroidery is priced by stitches, DTF by square inch, and none of it fits a price grid built for ink colors. If you decorate more than one way, or plan to, here is what to demand.

Pricing that matches each method

Screen printing is priced by quantity and number of colors, plus setup. Embroidery is priced by stitch count and placement, plus digitizing. DTF and DTG are priced by print size and quantity. Software that forces all of them into one grid leaves you quoting by hand again.

Look for a price grid per method, with quantity breaks, setup fees and rush upcharges, so a quote for 48 shirts with a front print and a left-chest logo prices both decorations correctly.

A separate production route for each method

A DTF job does not go through screens and a dryer, and an embroidery job needs digitizing and hooping. Each method needs its own stations and stages so the shop floor board shows the right next step for each job.

Print-Shop Manager builds these during first-run setup: you pick the methods you run, and it creates the stations, routes and price grids, then hides the pages you do not need.

One job, several decorations

Real orders mix methods: a hoodie with an embroidered chest logo and a screen printed back. That should be one job with one invoice and one proof, not two jobs that someone has to stitch together by hand.

Test it in any demo. Ask the vendor to build a quote with two methods on the same garment.

Capacity across every machine

Scheduling should cover presses, embroidery heads, DTF printers and heat presses together, so you can see what is overbooked this week before you promise a date.

Inventory for more than blanks

Blanks, ink, thread, film, powder and backing all run out at different rates. You want stock tracking and purchase orders that cover all of them, with supplier catalog data for the blanks you reorder most. Print-Shop Manager can look up live stock and pricing from SanMar and S&S Activewear when you add your account details.

Questions to ask on a demo

  1. Show me a quote with two decoration methods on one garment.
  2. Show me how embroidery pricing differs from screen print pricing.
  3. What does the shop floor board look like for a DTF job?
  4. What does this cost if I add three more people?

More on choosing in our buyer's guide, and how the main options compare in the 2026 comparison.

Build your shop's setup in the demo

Tell us which methods you run and we will set up the stations, routes and price grids live, using your own jobs.